FPGA & DSP boards for all types of real-time signal processing solutions
Octave’s digital signal processing solutions deliver a robust and powerful platforms for high performance FPGA based development.
Need Real-Time signal Processing Solution?
Contact us and share what you need, we’ll definitely get you to the right solution!
|OCT-DSPB –||V5PCI –||2A2D –||DC/AC –||S;GE;SD;FMC/F –||I|
|Series||Major Interface1 & FPGA Family/Type2||# of digital or analog channels3||AC or DC couple4||Options5||I/C grade (Industrial or commercial grade)|
|1 Please indicate if you need all interfaces, such as SATA, Ethernet, PCI and Serial. Or specify the only required interface or combination of them which you need.
2 Please specify the selected FPGA device mentioned in this datasheet while ordering.
3 Max number of channel is 2. If you need more channel please order the FMC modules. Refer to FMC Modules Table in next tab. You may also mention that you only need the analog channels or the digital channels.
4 Both AC or DC couple configuration are possible on analog interfaces, hence please point out whether you want the base configuration to be for AC couple or DC couple requirement. You may also specify to have one channel AC couple or DC couple, and have the other channel in other form which this have to be conveyed in a separate note, as the ordering code itself could not specify this clearly.
Note: If you need more analog or digital channels or other modules, you can consider the FMC connector and FMC daughter board extensions that allows plug-in FMC daughter cards in different available modules.
5 Refer to the Options Table below:
|S||SATA physical interface|
|GE||On board 10/100/1000 Ethernet connection physical interface|
|SD||Mini SD memory Socket|
|*You can indicate options in the correct place of ordering code structure as specified above:
– For ordering full options only place letter ‘F’
– For ordering multiple options use the ‘;’ to combine them in the ordering structure Example: OCT-DSPB-V5PCI-2A2D-DC/AC- S;GE-I
– If you don’t need these options, simply do not include options code in your made ordering code Example: OCT-DSPB-V5PCI-2A2D-DC/AC-I
|Download the OCT-DSPB-V5PCI-2A2D-DC/AC-I Datasheet|
FMC Modules Table*
|FMC-ETH-G1||On FMC daughter card 10/100/1000 Ethernet connection physical interface|
|FMC-2A**||2 channel ADC: Up to 250 MSPS and 14bit, DC or AC coupled, Max Input: 2Vp-p|
|FMC-2D**||2 channel DAC: Up to 275 MSPS and 14bit, AC coupled, Max output: 1Vp-p|
|FMC-1A1D**||• 1 channel ADC: Up to 250 MSPS and 14bit, DC or AC coupled, Max Input: 2Vp-p|
• 1 channel DAC: Up to 275 MSPS and 14bit, AC coupled, Max output: 1Vp-p
|FMC-2A2D**||• 2 channel ADC: Up to 250 MSPS and 14bit, DC or AC coupled, Max Input: 2Vp-p|
• 2 channel DAC: Up to 275 MSPS and 14bit, AC coupled, Max output: 1Vp-p
|FMC-TX||433 MHz, 900 MHz, 2.4 GHz or other standard band transmitter|
|FMC-RX||433 MHz, 900 MHz, 2.4 GHz or other standard band receiver|
|FMC-24xRS485/RS422||24 differential channels, 20Mb RS485/RS422 transceiver|
*If ordering FMC modules, please specify the module type separately. This could be our ready to use predesigned modules, or a new custom module for your need. Please inquire.
** For all analogue FMC cards please specify type of configuration (the AC or DC couple configuration) that is required on analog interfaces.